How To Access Tp Link Extender Settings
How do I log into the Spider web-based Interface of Wireless Access Signal or Extender(case ane)?
This Article Applies to:
The web-based management page is a born internal web server that does non crave cyberspace admission. It does however crave your device to exist connected to the TP-Link device. This connection tin be wired or wireless.
Note: Low version of your spider web browser may cause compatibility problem with the web-based interface(management page) of your device, such equally unable to log into the interface, display incomplete features etc. Information technology is strongly recommended to use a wired connection if y'all are going to change the device'southward wireless settings or upgrade the firmware version.
Notation : For those products whose DHCP are enabled by default, which are not listed as following, delight refer to this link.
This article applies to those wireless access points and extenders whose DHCP are disabled past default. ( TL-WA500G,TL-WA501G,TL-WA601G,TL-WA701ND v1, TL-WA801ND v1, TL-WA901ND v1/v2,Tl-WA730RE,TL-WA5110G,TL-WA5210G,TL-WA7210N V1, TL-WA7510N, TL-WA830 v1/v2 of old version.)
Earlier logging in to the Web-based Interface, you need to assign static IP accost on your computer.
Pace ane
Connect your computer to the LAN port of TP-Link with an Ethernet cablevision.
Stride 2
Assign a static IP address manually on your computer.
If yous don't know how to assign a static IP for your computer, you can refer to this FAQ:
How to configure TCP/IP Properties of my computer.
Here taking Windows 7 as an example:
1. Left click on Start- Command Panel- Network and Cyberspace- Network and Sharing Center- Change Adapter Settings (on the left side carte).
2. Right click on Local Area Connectedness and go to Backdrop. And so please double click on Internet Protocol Version 4(TCP/IPv4).
3. Please set a static IP address as 192.168.1.x as an example. If your AP is 192.168.0.254 delight fix a static IP accost like 192.168.0.10.
Annotation :
The LAN IP changes by model. Please find it on the lesser label of the product.
Step iii
Open the spider web browser and type the IP address of the admission point/extender (Default is 192.168.one.1/192.168.ane.254/192.168.0.254) into the address bar and so Press Enter.
Step 4
Type the username and password into the boxes of the login page, and the default username and password both are admin, and then click on OK.
NOTE:
ane. The in a higher place IP settings are for login to the Spider web-based Interface of TP-Link for configuration.
2. If y'all have a broadband router that provide you Internet connection, please re-configure the IP settings of your computer to Obtain an IP address automatically & Obtain DNS Server accost automatically.
Become to know more details of each function and configuration please go toDownload Eyeto download the manual of your production.
Is this faq useful?
Your feedback helps improve this site.
How To Access Tp Link Extender Settings,
Source: https://www.tp-link.com/us/support/faq/174/#:~:text=Open%20the%20web%20browser%20and,bar%20and%20then%20Press%20Enter.
Posted by: smithoved1958.blogspot.com
0 Response to "How To Access Tp Link Extender Settings"
Post a Comment